Prop 65 Warning


Product's may contain one or more substances or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.

View By Supplier

    Featured Brands

Product Detail

Show Larger Photo

Part #MLR907710001

  • Material Thickness: Steel: 0.020 in. - 3/16 in.
  • Input Voltage: 110/115/120 V ; 220/230/240 V
  • Input Phase: 1-Phase
  • Input Hz: 50/60
  • Current type: DC
  • Max Open Circuit Voltage: 48 VDC
Manufacturer: Miller Electric
TIG / Stick Welding Contractor Package w/ X-Case
Price: $1,689.00 Each

Truck or Mfg. Direct Ship Only
  • Separate 120 and 240 volt power cords disconnect from the rear panel of the machine without the use of any tools to allow your to common 120 and 240 volt power receptacles
  • Weighing in at 13 lbs. and featuring a convenient handle/shoulder strap, this little inverter-based Stick machine can be taken from location to location
  • By utilizing an inverter-based power source in the Maxstar 161, superior arc starts and excellent weld puddle control are provided in both the TIG and Stick settings - all in a small, light-weight package
  • Even on the difficult-to-run electrodes like E6010
  • With a built-in gas solenoid, the Maxstar 161 eliminates the need for a bulky TIG torch with a gas valve
  • With Miller's Adaptive Hot Start technology, you no longer have to worry about those difficult-to-strike electrodes
  • With the Stick-Stuck feature the machine detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode

Includes: Maxstar® 161 STL, 6.5 ft. primary cords for 120 V and 240 V, 13 ft. stick electrode holder with 25 mm. Dinse-style connector, 10 ft. work clamp with 25 mm. Dinse-stlye connector, Adjustable handle/shoulder strap